QQ交谈
MSN交谈Q45F三通球阀 三通T型球阀 三通L型球阀
- 公司名称：
- 更新时间：
- 所 在 地：
- 生产地址：
- 浏览次数：
- 永嘉县双德阀门有限公司
- 2018-01-07 21:49:37
- 温州市
- 678
【简单介绍】
【详细说明】
Q45F三通球阀【详细说明】
Q45F三通球阀产品特点
一、两阀座密封三通球阀结构紧凑、外型美观、密封性能好。
它能实现对管道中介质流向的切换。也能使相互垂直的两个通道连通或关闭。（如流向图A）
二、四阀座密封三通球阀造型美观，结构紧凑合理，它不仅可实现介质流向的切换，也可使三个通道相互连通，同时也可关闭任一通道，使另外两个通道连通，灵
活控制管路中介质的合流或分流。（如流向图B）
Features
1. In the double-seat sealing design, the 3-way ball valve enjoys compact structure,goodly configuration and favorable sealing performance. The valve could make a realization the switching of flow direction of the medium inside the pipeline, furthermore, it also could connectshut-down the two orthogonal passages.（As shown in Flow Graph A）
2.In the 4-seat sealing design, the 3-way ball valve enjoys reasonable, compact structure and goodly configuration. The valve could not only make a realization the switching of flow direction of the medium inside the pipeline, but also connect the 3 passages on another. Meanwhile, the valve also features the capacity of shutting-down one of the 3 passages while connecting the other 2 ones for the flexible control of the convergent flowshunting of the medium in pipelines.（As shown in Flow Graph B）
Q45F三通球阀主要零件材质Main Patrs and Materials
| 零件名称 Accessory name | 材 质 Material | |
| GB | ASTM | |
| 阀体、阀盖 Body,bonnet | WCB | A216-WCB |
| 密封圈 Sealing Ring | PTFE、对位聚苯 PTFE、Counterpoint polypheny1 | PTFE、对位聚苯 PTFE、Counterpoint polypheny1 |
| 球体 Ball | 1Cr18Ni9Ti | SS 304 |
| 阀座、阀杆 Seat、Stem | 2Cr13 | A246-416 |
| 双头螺柱 Dual-head double-screw bolt | 35CrMoA | A193-B7 |
备注：三通球阀一般采用两阀座结构，如流向图A所示两种工况。选用两阀座L型结构（即Q44型）。流向图B中①和④两种工况亦可选用两阀座T型结构（即Q45型）。流向图B 中②和③两种工况必须选用四阀座T型结构（即Q45型）。
其余工况也可选用四阀座结构,但应在订货合同中注明阀座结构。如阀门有其它要求请参阅样本《球阀的型号编制方法》填写相应的要求代号。
Remarks:
Double-seat configuration design is generally utilized for 3-way ball valve as shown in the 2 operating conditions in Flow Graph A which apply the L-Shaped construction with double-seat（Type Q44）.With regard to the 2 conditions of ① and ④ in Flow Graph B, the T-shaped construction with double-seat could also be applied（Type Q45）.In the ② and ③ conditions in this graph, the choice of the construction must be limited to T-shaped ones with 4-seat（Type Q45）. For other kinds of operating conditions, the construction with 4-seat
could also be applied, however, the construction of the relevant valve seats should be referred in advance in the contract for future delivery. For other requirements please refer to the sample of Organizing Method for Types of Ball Valves and fill in corresponding code numbers as required.
Q45F三通球阀主要性能规范 Main Performance Spcification
| 公称压力 PN（MPa） Nominal diameter | 试验压力 Test pressure | |||
| 壳体 Shell | 高压液密封 High-pressure liquid sealing | 低压气密封 Low-pressure hermetic sealing | ||
| 1.6 | 2.4 | 1.76 | 0.6 | |
| 2.5 | 3.75 | 2.75 | ||
| 4.0 | 6.0 | 4.4 | ||
| CLASS150 | 3.O | 2.2 | ||
| 适用工况 Applicable Operating Mode | 适用介质 Applicable medium | 水、油品、气等非腐蚀介质和酸碱腐蚀介质 Non-corrosion medium such as water, oil products, and gas, etc,and nitric acid corrosion medium. | ||
| 适用温度 Applicable temperature | -28-350℃ | |||
| 应用规范 Applicable specification | 连接法兰 Connecting flange | JB79-59、GB9113、HG20592-97、ANSI B16.5 | ||
| 检验试验 Test and inspection | GB9/T 9092-99、API 598 | |||
| 其余制造规范均按本厂标准 Other manufacturing standard is according to the standard of our factory. | ||||
Q45F三通球阀主要外型与连接尺寸表Form of Main Types and Connecting Dimension
| 公称压力或压力级 Nominal pressure | 主要尺寸 Main dimension | 公称通径 | |||||||||||
| 15/1/2″ | 20/3/4″ | 25/1″ | 32/11/4″ | 40/11/2″ | 50/2″ | 65/21/2″ | 80/3″ | 100/4″ | 125/5″ | 150/6″ | 200/8″ | ||
| PN1.6MR | L | 150 | 150 | 180 | 200 | 220 | 240 | 260 | 280 | 320 | 380 | 440 | 550 |
| PN2.5MPa | L1 | 75 | 75 | 90 | 1OO | 1 O | 120 | 130 | 140 | 160 | 190 | 220 | 275 |
| PN4.OMR | H | 90 | 90 | 102 | 115 | 135 | 140 | 155 | 185 | 21O | 275 | 305 | 335 |
| CLASS1 50 | W | 140 | 140 | 155 | 250 | 250 | 350 | 350 | 420 | 700 | 1000 | 1300 | 1800 |
