进口疏水阀

进口疏水阀-德国进口疏水阀 
德国莱克LIK世界*、超高压力、超高温。 
应用范围 
航天、工、核工业、船舶重工、石化、电力、能源、城市消防、供气、供水、气、水、油、蒸汽、燃气、腐蚀性流体等。 
德国莱克疏水阀相关产品: 
调恒温式疏水阀    可调恒温式疏水阀    热动力圆盘式蒸汽疏水阀
螺纹双金属片式疏水阀    液体膨胀式疏水阀    内螺纹自由浮球式蒸汽疏水阀
杠杆浮球式蒸汽疏水阀    圆盘式蒸汽疏水阀    型膜盒式蒸汽疏水阀
杠杆浮球式蒸汽疏水阀    倒置桶式蒸汽疏水阀    自由浮球式疏水阀
Y型式/热动力式蒸汽疏水阀    双金属片蒸汽疏水阀    自由半浮球式蒸汽疏水阀
利用高精度研磨不锈钢空心浮球在阀腔内随着凝结水的液位变化开启或关闭阀门。该疏水阀的结构比较简单，主要由浮球和自动排空装置组成。阀腔内*的动作元件——不锈钢空心浮球，采用高精度研磨工艺制造，整个球面均可做密封面，工作时无集中磨损，使用寿命长 ; 阀腔内无易损件，可靠性高。浮球能根据水位变化而自由调节阀孔的开度，能够连续排放凝结水，过冷度≈0℃，工作效率高。
自动排空装置分为两种 :（低压PN25以内）液囊热敏元件组成和（过热蒸汽系统）双金属片组成。
Free-ball float trap
The drain valve is opened or closed by taking advantage of the change of liquid level of condensate water with the high-precision grinding stainless steel hollow float ball in the valve cavity. This steam trap has a simple structure, mainly consisting of float balls and automatic emptying devices. The sole action elements, namely, the stainless steel hollow float ball is manufactured by high-precision grinding process, and its entire sphere can serve as the sealing face and will not be worn intensively during the work, so it has a longer service life. In addition, there is no wearing part in the valve cavity, with a high reliability. The float ball can freely adjust the openness of the valve opening in response to the change of water level and discharge the condensate water continuously with a subcooled temperature of about 0℃ and higher efficiency.
The automatic emptying devices fall into two types : （within low pressure PN25） consisting of reservoir thermo-sensitive elements and （overheated steam system） consisting of bimetals.
优点：
1、*转动的是高精度研磨的不锈钢浮球，抗腐蚀。
2、结构简单，维修方便。
3、不受压力波动的影响，连续排水，噪声小。
4、装有自动排空装置，能够迅速排除空气，防止气堵和汽锁。
5、体积小，排量大。
6、有水就排，能够加快系统启动速度。
Merits
1. The sole moving component is the high-precision grinding stainless float ball, which can resist erosion.
2. Its simple structure is convenient for maintenance.
3. To drain continuously with low noise, without being affected by the fluctuation of the pressure.
4. To be equipped with automatic emptying devices and it can eliminate air quickly and prevent air blocking and steam locking.
5. Small volume and large displacement.
6. To drain whenever there is water left over so as to quicken the startup speed of the system.
 主要零件材料/The materials of primary accessories
零部件名称Part and component name    材质Material
阀体、阀盖Valve body、valve cover    铸铁、铸钢、不锈钢Cast iron、Cast steel、Stainless steel
自由浮球Free float ball    304/316不锈钢304/316 Stainless steel
阀座Valve seat    高铬不锈钢High chrome stainless steel
自动排空气装置Automatic air exhaust    不锈钢、热敏元件Stainless steel、Thermo-sensitive element
过滤网、罩Filtrating screen、Cover    不锈钢Stainless steel
不锈钢球直径/Diameter of stainless ball
材质/Material    B,JH5N    D,JH7N    E,JH9N    F,JH11N    G,JH13N
铸铁 Cast iron    68    110    150    180    200
铸钢 Cast steel    70    120    150    190    220
工作原理说明：
在设备刚启动时，低温冷凝水和空气同时进入阀腔，这时开启自动排空装置将空气排除，使低温凝结水顺利进入阀腔，阀腔内的凝结水的液位随即上升，使浮球升高，开启阀孔，将凝结水迅速排出 ; 前面的蒸汽很快进入加热设备，使设备迅速加热升温，当蒸汽或较高温度的凝结水进入阀腔时，自动排空装置开始膨胀，关闭自动排空气装置，疏水阀开始正常工作。这时阀腔内的浮球随凝结水液位的高低而升降，能连续的排放凝结水。由于自由浮球式疏水阀的阀座孔总处于凝结水液位以下，形成水封，水汽自然分离，工作时达到无蒸汽泄漏。该阀的zui小工作压力为0.01Mpa，从0.01Mpa至zui高工作压力范围内不受温度和工作压力波动的影响，能连续工作，其zui小过冷度约为0℃，由于该阀能自动、连续地排除凝结水，加热设备内不会有水积聚，能使加热设备达到*换热效率。是生产工艺加热设备的疏水阀之一。
Description of work principle
Both low-temperature condensed water and air will run into the valve cavity when the equipment is just started, consequently, automatic air discharge equipment will be open and discharge the air, enabling low-temperature condensed water coming into the valve cavity smoothly, at the moment, the level of low-temperature condensed water inside will rise swiftly, which bring about elevation of ball floating and open of valve hole, for the purpose of discharging the condensed water; the steam earlier will enter into heating equipment soon, which have equipment heating and promoting temperature in a fast manner, the automatic air discharge equipment will start inflating as the steam or rather high-temperature condensed water enter into valve cavity, otherwise, trap should operate normally as soon as the automatic air discharge equipment is closed. At the moment, the ball floating inside valve cavity will up and down along with the level of the condensed water, and with capability of continuously discharging condensed water. Due to the fact that the valve seat hole of free-ball float trap is always below the level of condensed water, ultimay formed water seal that separated water and steam in a natural way, therefore, there should be in no circumstance of leakage of steam during operation of the equipment. The valve will bear the minimum work pressure of 0.01 Mpa, in addition, it will keep operating continuously without influence of temperature and fluctuation of work pressure within the scope between 0.01Mpa and maximum work pressure. In consideration of the minimum super cooling degree of the valve is about 0℃, coupled with the fact that the valve is capable of discharging condensed water automatically and continuously, therefore, heating equipment will remain absence of accumulated water, which could have heating equipment reach optimum efficiency in heat exchange. All in all, the valve is one of the best traps for heating equipment applicable to production.