YFT-C型液压阀门测试台
YFT-C50组合式液压阀门试验台
YFT-C50 couple type hydraulic valve test bench
技术性能与特点：
1. 适用于DN50mm以下规格法兰连接、焊接和螺纹连接阀门的性能测试。
2. 兼备夹爪抱压式与顶压压紧式两部分，将试验工件沉入水箱中，可上下升降及夹爪抱压部分具有90度翻转功能，特别适用应气体压力试验，操作使用方便。
3. 试验介质可由水、气或者煤油，由客户自选。
4. YFT-C50已配置高压水泵及供压系统，可直接进行水压试验。如采用气为介质则气泵需用户自配。
5. 试验台用水及油等试验介质可循环使用。
6. 设有液压自动卸荷系统，使用时，高压状态与卸荷状态自动切换，有效降低了油温，延长设备使用寿命。（如使用环境温度过高，用户可选择配置液压油冷却系统。）
Technical performance and feature:
1. It’s especially suitable to have a test for smaller then DN50mm flange, welding or threaded valve.
2. It both has claws clamp and impaction cylinder two parts, and the test valves can be submerged under the water with the clamp parts which up and down by cylinders. One side of the claws clamp part can turn over 90 degrees, so it’s convenience to operate.
3. Test medium can be choosing by user, water, air or kerosene.
4. It has high pressure water pump, so you can have the water test directness. If you want to use air test, the air pump need to be set by yourself.
5. The water and hydraulic oil used by the test bench are circulation.
The test bench has an automatic oil pressure discharge system. When using it, the high pressure condition and the relief pressure condition can be charged by itself. So it can reduce the oil temperature, elongate life of the test bench. If the temperature of environment is too high, user can choose the system for reducing hydraulic oil’s temperature. We also offer it.
泵阀商务网