ISO 15407-1/2 Valves and solenoid valves 18-26 mm 5/2-5/3-3/2+3/3
Valves and solenoid valves, spool system, side 18 and 26 mm according toISO15407-2 or VDMA 24563/ISO15407- 1specification which establish the dimensions of the bearing surface and the minimum distance between two valve places, guaranteeing the interchangeability and possibility to include any valve providing it complies with above specification.
- VDMA 24563/ISO 15407-1 pneumatic coupling standard between valve and sub-base. *ISO 15407-2 electric coupling standard between valve and sub-base.
Body
acetalic resin and die-cast zamac
Pressure
9 bar max. （electrical control）
x
10 bar max. （pneumatic control）
Fluid temperature
50?C max.
Ambient temperature
-20? ??C
Fluid
filtered air 50 ?m not dehumidified or neutral gases,
x
lubricated or non lubricated
Switching system
spool
Valve function
5/2-5/3-3/2+3/2
Sub-base according toFlow-rate Nl/min with fitting
x
VDMA-ISO
oversized
xx
x
?pan>
?pan>
?span>
?span>
?pan>
?pan>
?span>
?span>
x
5/2
500
950
1200
1250
500
1050
1500
1700
x
5/3
500
950
1100
1150
500
1050
1300
1400
x
3/2+3/2
500
950
1150
1250
500
1050
1450
1650
Seals
nitrile rubber
Control
indirect electropneumatic or pneumatic
Return
mechanical spring, pneumatic spring
x
Manifold sub-base 1 valve place and end plates with side connections in aluminium.
Voltage
24Vd.c. - 2,5W standard
x
12Vd.c. - 2,5W upon request
Protection
IP65 for BDE series; for the other series depending on the
x
coil used
Coil
DD series
Flying prewired connectors and connectors for serial systems
