2024-03-28
1.断续工作压力指入口工作压力,连续工作压力指工作压差。
2.马达不应同时在zui高压力和zui大转速下工作。
3.*用68#抗磨液压油,粘度37-73cst,清洁度iso18/13。
4.马达在断续工作条件下,运行时间每分钟不得超过10%。
5.工作油温zui高80°
6.马达满负荷工作前,应在zui高工作压力的40%以下磨合1h。
7.马达允许zui高背压10mpa,但*不要超过5mpa,超过时应接外泄油管。
1. intermittent means the entrance of the maximum pressure; continuous working pressure means the differential pressure
2. motor should not work under the highest pressure and the maximum speed
3. recommending n68 anti-wear hydraulic oil, viscosity 37-73cst, cleanliness iso18/13.
4. the running time should not exceed 10% under intermittent working conditions
5. the maximum working temperature is 80 °
6. one hour running time under 40% of maximum working pressure is recommended before full capacity working.
7. the maximum allowable back pressure is 10mpa, but the recommended back pressure should not exceed 5mpa.a leaking pipes is needed when exceeding
摘要:挖掘机及环卫扫地车上用摆线液压马达BM系列产品报价: [详细]
端面配流式液压马达BM5系列清洁车用摘要:产品名称:产品型号:产品价格:200.00元/台 [详细]
煤机机械用摆线液压马达OMH-1000系列摘要:产品名称:产品型号:产品价格:200.00元/台 [详细]
摆线液压马达BM4系列工作压力稳定摘要:产品名称:产品型号:产品价格:200.00元/台 [详细]
[*] 车轮液压马达BM2系列分类(BM)摘要:可靠的轴端密封设计,能承受高压,可串联和并联使用。 [详细]
[新品] 行星制动器液压马达BM3系列结构(BM)摘要:船舶甲板等起吊设备用,是在普通液压马达内液压缸缸体的外圆弧槽内装 [详细]
[新品] 液压马达OMS系列分类图(OMS)摘要:马达允许串联和并联使用,串联使用时应接外泄油管。◎采用圆锥滚子轴承 [详细]
无轴承液压马达BM6系列外形尺寸(BM)摘要:无轴承液压马达BM5系列无轴承马达,除了没有输出轴及轴承壳体外,无轴 [详细]