济宁力耐通液压机械有限公司

销售摆线液压马达,车轮马达,液压绞车,制动器

泵阀商务网收藏该商铺

     小标 您所在位置:首页 > 供求商机> 低速大扭矩液压马达,钻机马达报价,吊车马达,渔机马达...
产品搜索

请输入产品关键字:

联系方式
地址:济宁高新开发区置城国际内
邮编:272100
联系人:孟经理
留言:在线留言
商铺:https://www.bf35.com/st61685/
供求商机

低速大扭矩液压马达,钻机马达报价,吊车马达,渔机马达...

  • 发布日期:
  • 有效日期:
  • 所 在 地:
  • 产  地:
  • 已获点击:

  • 2014年11月25日
  • 2015年11月25日
  • 山东济宁市
  • 山东济宁
  • 157次

【产品简介】

Z大工作压力指入口Z大压力,额定压力指工作压差。
2.马达不能同时在Z大压力和Z高转速下工作。


【详细说明】

LM4系列摆线液压马达

LM4摆线液压马达实物图液压摆线马达LM4系列

 

结构特点

采用镶柱式定转子设计,具有更高的配油精度及机械效率。

双滚动轴承设计,具有更大的侧向承载能力。

可靠的轴密封设计,承受背压高,可以串并联使用。

正反转换向方便、转速平稳。

多种油口输出轴法兰等连接形式。

 

Characteristic features

It adapts the gerolor design, which has a higher distribution accuracy and Mechanical efficiency.

Double-rolling bearing design, which has a greater lateral load capacity.

Credible design of shaft seal, which can bear higher pressure and be used in parallel or in series.

Direction of shaft rotation and speed can be controlled easily and smoothly.

A variety of connection types of flange; Rabbet:, output shaft and oil port.

主要性能参数 Main Specification

LM4摆线液压马达性能参数表

1.zui大工作压力指入口zui大压力,额定压力指工作压差。

2.马达不能同时在zui大压力和zui高转速下工作。

3.在断续工作条件下,运行时间每分钟不得超过10%。

4.*用68#抗磨液压油,粘度37-73cSt,清洁度ISO18/13。

5.zui高工作油温80°。

6.马达全负荷工作前,应在zui高工作压力的40%以下磨合1小时。

7.马达允许zui高背压10MPa,但建议不要超过5MPa,超过时应接外泄油管.

 

1. Intermittent means the entrance of the maximum pressure; continuous working pressure means the differential pressure

2. Motor should not work under the highest pressure and the maximum speed

3. The running time should not exceed 10% under intermittent working conditions

4. Recommending N68 anti-wear hydraulic oil, viscosity 37-73cSt, cleanliness ISO18/13.

5. The Maximum working temperature is 80 °

6. One hour running time under 40% of maximum working pressure is recommended before full capacity working.

7. The maximum allowable back pressure is 10MPa, but the recommended back pressure should not exceed 5MPa.a leaking pipes isneeded when exceeding

LM4 系列连接尺寸----外形图 Dimension and Mounting data

LM4液压马达外形图

LM4系列订货信息 Ordering Information

LM4液压马达订购信息表

LM4 Ordering Information

LM4液压马达英文版订购信息表

 

    
留言框
感兴趣的产品: *
留言内容:
您的姓名: *
您的单位:
联系电话: *
微信:
常用邮箱:
详细地址:
省份: *
验证码: * =   请输入计算结果(填写阿拉伯数字),如:三加四=7
是否接受其他厂商报价: *
      
| 商铺首页 | 公司档案 | 产品展示 |公司动态 | 询价留言 | 联系我们 | 会员管理 |
泵阀商务网 设计制作,未经允许翻录必究.Copyright(C) https://www.bf35.com, All rights reserved.
以上信息由企业自行提供,信息内容的真实性、准确性和合法性由相关企业负责,泵阀商务网对此不承担任何保证责任。
温馨提示:为规避购买风险,建议您在购买产品前务必确认供应商资质及产品质量。
二维码

扫一扫访问手机站