【简单介绍】
【详细说明】
喷雾式切削冷却器
spray cooler cutting
通用于高速之微量切削冷却。
Applied to cool the micro–cutting under the high-speed .
结构特点:
1进口有两处,一为油。一为空气。
2调整螺栓可调节油、空气输出大小。
3空气为压力输出带动油进入。
1 two inlet ports .one for oil ,and the other one for air
2 adjust bolt to adjust the oil and air .
3 the pressure exportation air arouses into the oil
特点
1喷雾器上气量及冷却液是可调节,不方便在不同的加工条件上使用。
2随喷雾器上附送冷却液瓶座。
3次瓶座配合多款流行饮料尺码方便客户更换瓶身可以自由切换水管的长度,基本长度为2 M。
4在操作过程中,冷却、润滑、吹除铁屑可一次完成。
5不仅可增加加工切削速度,节省加工费用及时间并减少*磨损。
6可确保加工工件精修品质及**使用效果。
7即使合金超硬之工件也可达到平滑高精度加工表面。
Characteristic
1 air and coolant on sprayer is adjustable ,and it is convenient for uses under different machining conditions
2 we donate coolant bottom base along with sprayer .
3 the bottom base works well with many popular sized beverage bottles to provide convenience for customer to change the length of tube to suit them , the length is basically 2m
4 it can conduct cooling ,lubricating and removing scrapped iron simultaneous during work .
5 it not only can increase cutting speed of machining and machining cost and time ,but also can reduce tool worn-out .
6 it can ensure excellent quality of machined parts and best use effect .
7 parts of alloy rigid can also reach smooth and high precise machine face
相关产品
请输入产品关键字: