HSNH940-42三螺杆泵、HSN系列螺杆泵报价
如果您对三螺杆泵的安装尺寸、性能参数，以及产品的参考价格，有疑问可以随时我公司的，我们将在*时间为您提供您所需要产品的相关信息：
：hstmby01
：程晓
:
HSNH系列三螺杆油泵概述
The HSNH series three screw pump overview three screw pump features and advantages:
三螺杆泵特点及优点：
（1）HSNH三螺杆油泵的压力和流量范围宽阔，流量范围0.2～580m3/hzui高工作压力可达4MPa；
（1） HSNH three screw pump a wide range of pressure and flow, the flow range of 0.2 ~ 580m3/h maximum workingpressure up to 4MPa;
（2）HSNH循环油泵输送送液体的种类和粘度范围宽广,粘度范围3mm2/s-760mm2/s；
（2） HSNH circulation pump for the conveyance of liquid type and a wide range of viscosity, viscosity in the range of3mm2/s-760mm2/s;
（3）因为HSNH三螺杆泵内的回转部件惯性力较低，故可使用很高的转速；
（3） because of the rotary inertia force components HSNH three screw pump is low, it can use very high speed;
（4）HSNH液压油泵吸入性能好，具有很强的自吸能力；
（4） HSNH hydraulic oil pump suction performance is good, has a strong self absorption capacity;
（5）HSNH螺杆供油泵流量均匀连续，振动小，噪音低，几乎没有脉动；
（5） HSNH screw pump flow is uniform and continuous, little vibration, low noise, almost no pulse;
（6）HSNH三螺杆泵组结构坚实，安装方便有（卧式、立式、法兰式、插装式）保养容易；
（6） HSNH three screw pump solid structure, convenient installation （horizontal, vertical, flange type, plug-in） easy maintenance;
（7）HSNH三螺杆泵具有很强的耐热性，一般工作温度是（1~250°C）超过此温度要在订货时说明，我们将为您定做金属波纹管密封耐高温系列三螺杆泵；
（7） HSNH three screw pump has a very strong heat resistance, the general working temperature （1~250 ° C） over this temperature to indicate in order, we will for your custom metal bellows seal of high temperature resistant series three screw pump;
（8）HSNH稀油润滑站用三螺杆泵可根据所输送介质需要还可提供加热或冷却结构；
（8） HSNH thin oil lubrication station with three screw pump according to the transmission medium to provide heating or cooling structure;
（9）HSNH液压油泵三螺杆泵几乎没有磨损，三螺杆泵只要选型正确，使用的寿命是很长的。
（9） the HSNH hydraulic pump three screw pump almost no wear, three screw pump as long as the selection of the right, the use of life is very long.
（10）HSNH液压站配套用三螺杆泵的工作效率高。
（10） HSNH hydraulic station matching with the three screw pump with high efficiency.
HSN, HSNH, HSNF, HSNH系列三螺杆泵,螺杆泵电机组
一、概述 One, overview
HSN 系列三螺杆泵适于输送燃料油、润滑油、液压油等油类和具有润滑性的液体。所输介质中不得含有任何磨料颗粒和对泵材料有腐蚀的物质。
HSN series three screw pump for delivery of fuel oil, lubricating oil, hydraulic oil and other oils and lubricating liquid.The transmission medium not containing any material abrasive particles and the corrosion of pump material.
HSN系列三螺杆泵在燃油系统中用作输送、增压及燃油炉的燃油泵；在输油系统中用作传输及加油泵；在一切工业领域中皆可用作润滑油泵；用于各种液压传动装置中的液压泵。适用压力范围：4.0Mpa，温度≤150℃、粘度3-760cst.
HSN series three screw pump is used as the fuel pump, turbocharger and fuel furnace in the fuel system; used fortransmission and pumps in the oil system; in all industrial fields are used as lubricating oil pump; hydraulic pump forvarious hydraulic transmission device in the. The applicable pressure range: 4.0Mpa, temperature ≤ 150 ℃,viscosity of 3-760cst.
二、结构特点 Structural characteristics
HSN系列三螺杆泵由特殊型线构成的螺旋面的主动螺杆转动时，其动密封腔室将把液体由吸入口吸入并沿轴向连续、无脉动的输送到排出口。主杆采用液压平衡，从杆的轴向力支撑在后盖上，并由液压力驱动旋转，因而螺杆型面仅传递液压扭矩，并不受力，也无磨损，对全部传动零件而言，均由被输送介质润滑。主杆的径向由平衡活塞定位，且借助于平衡活塞和轴套的间隙使高压腔和密封腔分开，在密封腔内装有机械密封，腔内的油液回油孔与泵的吸入腔相通，因而不受排出压力的影响。由于部件通用组合系列化有多种结构，可用于卧式（H），法兰式（F）和立式（S）安装。
Rotation of the spiral surface of HSN series three screw pump is composed of special type line consisting of active screw, the dynamic seal chamber will bring the liquid from the suction port of the suction along the axial direction and no pulsation continuous, transported to the outlet. The main rod adopts the hydraulic pressure balance, from the axial force rod support on the rear lid, and by the hydraulic pressure drive rotation, so screw type only transferof hydraulic torque, no stress, no wear, for all the transmission parts, all by the transported medium lubrication.The main rod radial by balancing piston position, and by the clearance between the piston and sleeve balance that high pressure chamber and separate the sealing cavity, with the mechanical seal cavity, cavity of the oil return holeand pump suction cavity, so it is not affected by the discharge pressure. Because the components of combinationseries has a variety of structure, can be used for horizontal （H）, flange type （F） and vertical （S） installation.
根据所输送介质需要还可提供加热或冷却结构。
According to the transmission medium to provide heating or cooling structure.
公 司 名称： | 黄山天曼泵业有限公司 |
姓名： | 程晓 （销售 ） （） |
办 公 地址： | 中国 黄山市徽州区城北工业园 |
邮 编： | 245400 |
电 话： | 86- |
传 真： | 86- |
移 动 ： | |
邮 箱： | Hstmby01 |
： | |
阿 里 旺旺: | 旺旺：hstmby01 |
公司主页： | http;//www.hstmby.comhttp://www.luogb.com http://www.cntmby.comhttp://www.tm-p.cc |
Company name: Mount Huangshan teamon pump industry limited company
Contact person: Mr. Cheng Xiao （Sales Manager） （）
Office address: China Huangshan City Huizhou area north of the City Industrial Park
Postal Code: 245400
86-
86-
phone:
: Hstmby01
: :
A: I want to: hstmby01
Company homepage: http; //www.hstmby.comhttp://www.luogb.com
http://www.cntmby.comhttp://www.tm-p.cc
