PPE公司的产品目前主要应用在能源、石化装备、LNG、医疗器械、汽车引擎（氢气项目）、工程器械液压系统、船舶制造、仪器设备、储存罐、高压测试仪器、燃烧控制系统、气体压缩系统、饮料罐装设备电磁阀等领域；PPE产品拥有：微型（zui大只有几厘米大）、耐高压（特殊可以达到10000PSI）、防爆（UL\CSA防爆认证）、低功耗（zui小功耗0.5W）等优势。从应用功能分为：防爆、高压、自保持式、喷射式、旋转式等专业电磁阀。
制氢制氧设备电磁阀部分型号参数如下：
SPECIFICATIONS
SERIES 20—MODEL H22
Three-way normally closed valve for high pressure applications. Valve
must be mounted within 30° of vertical.
OPERATING CONDITIONS
?Media: Air and other non-corrosive gases, water and oil.
Valve Temperature Range: Standard Valve-0°F（-18°C） to 104°F（40°）
ambient; 0°F （-18°C） to 150°F（65°C）
media. Optional Valves can tolerate much
higher or much lower ambient and media
temperatures. Consult factory for specifics.
Burst Pressure: 5000 PSI
Maximum Operating Pressure Differential: to 3000 PSI
?To insure trouble free operation, filtration down to 60 microns or less is recommended.
ELECTRICAL CHARACTERISTICS
Coil Voltage: 5 to 825 VAC, 50-60 Hz. 1.8 to 265 VDC
Nominal Power: H22 EH 22
A.C. 7.7 watts A.C. 7.3 watts
D.C. 9.5 watts D.C. 9.5 watts
Coil Construction: Standard valve—molded and non-molded
Explosion Proof valve–molded coil and
3rd wire ground （standard）
Typical Response Time on Air: 4-16 milliseconds
MECHANICAL CHARACTERISTICS
Body: Stainless Steel
Orifice Diameter: 1/32” - 3/32”
Porting: 1/8” and 1/4" NPT
Housing: Standard valve–1⁄?" NPT conduit and grommet
Explosion Proof valve–1⁄?" NPT conduit with 3rd
Wire Ground （EP only）
STANDARD
GROMMET HOUSING
EXPLOSION PROOF
Listings: Valves are U.L. Listed and CSA Certified for Hazardous Locations—Class I,
Div 1, Group C and D - Class II, Div 1, Groups E, F, and G; Div 2 Groups
A,B,C,D,E,F, and G.
深圳市德腾机电设备有限公司*代理美国Peter Paul 电磁阀，包括防爆电磁阀、高压防爆电磁阀、自锁式电磁阀、磁保持式电磁阀、低功耗电磁阀、低功率电磁阀、超高压电磁阀、试验零泄漏电磁阀、医疗材质用的医疗电磁阀等。
制氢制氧设备电磁阀其他型号或其他关于阀体、端口、密封、电气连接等选项请咨询代表处。
:屈敏
:
:qumin@diateng.com
传真:
:
深圳市德腾机电设备有限公司
