QY290专业生产：气动角座阀、气动隔膜阀、电磁阀、限位开关、三联件

 

 

特点及用途> characteristics and uses of

   本系列角坐阀是本公司引进国外生产技术，结合现代化工业应用研发而成的新一代气动角座阀。它广泛用于食品和化学过程，灭菌机，高压消毒器，干洗机，啤酒生产线。与传统角座阀相比，它具有以下新特点：

1、可视位置指示：可接限位开关或紧急手动装置。

2、容易安装：气动头可旋转360 º。可方便地安装一到二个限位开关。

3、*的气动控制器：加厚工程塑料外壳，安全可靠。低磨损的活塞结构，容量大而低耗气量。内部元件自润滑，免维护。

4、具有多种控制方式：常开、常闭、双动。

5、要求更小的气动执行器：流体从阀杆上方流入时，可选更小的控制头。

6、容易连接：MAMUR标准连接，嵌入式金属接头。

7、长寿命导杆：阀杆契形特氟隆（PTEE）密封，避免赃物导入。自润滑，免维护。阀杆经特别处理以确保*固定，并能自动校正位置。

8、无水锤作用，流体从阀杆下方流入时，水锤（水冲击力）被吸收。

9、*的阀体机构：流量比普通角座大30%，体积更小，流体流态更优。不锈钢316阀体，特氟隆密封，耐高温，耐腐蚀。寿命高达七百万次。

 

This series of angle seat valve is the latest introduction of foreign production technologies, combined with modern industrial application of research and development from a new generation of pneumatic angle seat valve. It is widely used in food and chemical processes, sterilization machine, high pressure sterilizer, dry cleaning machines, beer production lines. With the traditional angle seat valve, it has the following new features:
1, visual position indicator: which can be accessed by limit switch or emergency manual device.
2, easy to install: pneumatic head rotating 360 º. Can be easily installed limit switch 1-2.
3, advanced pneumatic controller: thickening of engineering plastics shell, safe and reliable. Low wear of the piston structure, large capacity and low air consumption. Internal components of self-lubricating, maintenance-free.
4, with a variety of control mode: Normally open, normally closed, double-action.
5 requires a smaller pneumatic actuators: fluid from the stem above the inflow, the optional smaller control head.
6, easy to connect: MAMUR standard connector, embedded metal connector.
7, long-life guide: Lease stem-shaped Teflon （PTEE） sealed to avoid the import of stolen goods. Self-lubricating, maintenance-free. Stem, by special treatment to ensure that the best fixed, and can automatically correct location.
8, no water hammer effect, fluid flows from the stem below, the water hammer （water impact） has been absorbed.
9, advanced valve bodies: the flow angle than ordinary buildings 30% smaller, the fluid flow better. 316 stainless steel body, Teflon seals, high temperature, corrosion-resistant. Life expectancy of up to 7,000,000 times.

 

技术特性表> Technical characteristics of Table

 

注：*常闭无水锤  **常闭有水锤   A为ARES型   B为ZEUS型         Note: * ** normally closed water hammer water hammer has often closed ARES type A for type B for the ZEUS