上海申升泵阀制造有限公司

泵阀类产品;给水设备;相关电气控制设备

泵阀商务网收藏该商铺

您所在位置:
上海申升泵阀制造有限公司>> 供应上海申升GC型锅炉给水泵
产品展示

供应上海申升GC型锅炉给水泵

  • 公司名称:
  • 更新时间:
  • 所 在 地:
  • 生产地址:
  • 浏览次数:
  • 上海申升泵阀制造有限公司
  • 2016-07-24 18:27:21
  • 上海市华池路58弄5号211室
  • 268

我要询价

【简单介绍】

【详细说明】

产品简介
TSWA型卧式多级离心泵是我公司在TSW型泵的基础上吸收国内外多种多级离心泵的优点改进而成的新一代产品,符合JB/T53058-93质量标准。
本系列泵由于采用了优秀的水力模型及低转速电机,因而具有高效节能、运行平稳、噪音低、振动小等优点,同时,易损件寿命成倍增长大大延长了泵的使用寿命。
Product brief introduction
 TSWA s mould horizontal many stages centrifugal pump is the merit improvement and the new generation product that becomes of absorb many kinds of many stages centrifugal pumps in the home and abroad of my corporation on the foundation of TSW s mould pump , and fits JB/T53058-93 s quality standard .  This the series pump is because having used outstanding waterpower model and low rotational speed electrical machinery , thus possessing the merits such as high efficiency save energy and operating are smooth and steady and the noise hangs down and the vibration is small etc , at the same time , Yi Sunjian is doubled increasing having lengthened the service life of pump greatly life span
应用范围
主要适用于城市高层建筑给排水及消防用水、工厂、矿山给排水、远距离输水、生产工艺循环中用水、暖通空调循环、生活用水等多种用途。
The application scope
Chiefly be suitable in city high-rise plumbing and fire fighting with Shui factory , mine plumbing and the distant range lose Shui of use Shui Nuan of production technology DO loop to lead to air-condition DO loop and life with water etc many kinds of uses
工作条件
1、适合于输送渭水及物理化学性质类似于清水的物质,真固体不溶物体积不超过单位体积0.1%,粒度≤2mm;
2、介质温度:-15℃~80℃;
3、工作压力:系统压力≤3.0MPa;即:系统压力=入口压力十泵工作时的压力≤3.0MPa;
4、周围环境的温度应低于40℃,相对湿度应不超过95%;
5、由于本型泵主要部件均为铸铁材质,因此所输送介质应无强腐蚀性。
注:如介质带有细小颗粒或真强腐蚀性时,请在订货时说明,以便提供更为可靠之产品。

The work condition
1 , the similar matter  in the clear water of the physical chemistry quality being fit for in carries Weihe Shui Ji the real solid does not  dissolve the body to amass  not surpassing unit volume 0.1%, size ≤ 2mm  2 , the medium temperature : - 15 ℃s ~80 ℃ ;
3 , work pressure : System pressure ≤ 3.0MPa Namely : Pressure ≤ 3.0MPa  during pressure ten pumps work of system pressure = entrance
4 , the temperature of surrounding environment should be lower than 40 ℃s , and the relative humidity should  not surpass 95% 
5 , the major parts owing to this mould pump all for iron casting material nature , therefore the medium carried should not have strong corrosiveness
The notes : Request the explanation when the order , so that providing the more reliable product when having very small anything small and roundish or corrosiveness strong really like the medium .

 
性能参数
·点击浏览性能参数

产品结构示意图

    
留言框
感兴趣的产品: *
留言内容:
您的姓名: *
您的单位:
联系电话: *
微信:
常用邮箱:
详细地址:
省份: *
验证码: * =   请输入计算结果(填写阿拉伯数字),如:三加四=7
是否接受其他厂商报价: *
      

相关产品

产品搜索

请输入产品关键字:

联系方式
地址:上海市普陀区华池路58弄新体育广场5号楼211-213室
邮编:200070
联系人:范李
留言:在线留言
商铺:https://www.bf35.com/st13854/
| 商铺首页 | 公司档案 | 产品展示 |公司动态 | 询价留言 | 联系我们 | 会员管理 |
泵阀商务网 设计制作,未经允许翻录必究.Copyright(C) https://www.bf35.com, All rights reserved.
以上信息由企业自行提供,信息内容的真实性、准确性和合法性由相关企业负责,泵阀商务网对此不承担任何保证责任。
温馨提示:为规避购买风险,建议您在购买产品前务必确认供应商资质及产品质量。
二维码

扫一扫访问手机站