进口气动管夹阀Pneumatic Pinch Valve
概述：进口气动管夹阀是以气动装置为驱动源，可以实现远程控制的管夹阀。可广泛应用于矿山、冶炼厂、水泥厂、污水处理厂、介质输送管道。
Summary: imported pneumatic tube pinch valve is a pneumatic device to drive source, can realize the remote control of the pipe clamp valve. Can be widely used in mines, smelters, cement plants, sewage treatment plant, medium conveying pipeline.
结构组成：由气动装置、左右铸铁、碳钢、不锈钢阀体、橡胶管套、大小阀杆、闸板、上下导柱等零件组成，
Structure: by the pneumatic device, or cast iron, carbon steel, stainless steel body, the rubber sleeve, the size of the stem, gate, upper and lower guide pillars and other parts,
进口气动管夹阀工作原理：在控制介质未输入时，胶套和阀体之间的空腔与大气连通，胶套受流体压力处于向外张紧状态。由于管套内有一定角度排列的增强帘布层，使管套轴向和径向压力相互平衡，所以管套的长度与直径不会因流体压力而变化。当控制介质进入管套与阀体之间的空腔时，管套在介质压力下变形截流。
Imported pneumatic tube pinch valve working principle of: in control medium without input, cavity and air between the rubber sleeve and the valve body is communicated, the rubber sleeve by the fluid pressure in the outward tension. Because the sleeves with reinforcing ply angle is arranged, make the tube axial and radial pressure balance each other, so the length and diameter of pipe not because of fluid pressure changes. When the control medium into the cavity between the sleeve and the valve body, closure deformation under pressure in the medium.
产地：德国  Origin: Germany
产品品牌：德国Orsen奥尔申 The product brand: German Orsen